Stepper motor - 200 steps/rev, 12V 350mA View larger

Stepper motor - 200 steps/rev, 12V 350mA

 This 4-wire bipolar stepper has 1.8° per step for smooth motion and a nice holding torque. The motor was specified to have a max current of 350mA

More details

A#324

New

This product is no longer in stock

15.01 JD

Specification

  • 200 steps per revolution, 1.8 degrees
  • Bipolar stepper, requires an H-bridge!
  • 4-wire, 12 inch leads
  • 42mm/1.65" square body
  • 31mm/1.22" square mounting holes, 3mm metric screws (M3)
  • 5mm diameter drive shaft, 24mm long, with a machined flat
  • 12V rated voltage (you can drive it at a lower voltage, but the torque will drop) at 350mA max current
  • 28 oz*in, 20 N*cm, 2 Kg*cm holding torque per phase
  • 35 ohms per winding

Download

8.00 JD

The Arduino Uno is a microcontroller board based on the ATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button.

13.01 JD

The Arduino Mega 2560 is a microcontroller board based on the ATmega2560. It has 54 digital input/output

  • Comments ()